EasyManua.ls Logo

Brother DCP-J925DW - Cleaning the Paper Pick-Up Rollers

Brother DCP-J925DW
75 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
58
Cleaning the paper pick-up
rollers A
a Unplug the machine from the electrical
socket.
b Pull the paper tray completely out of the
machine.
Note
If the machine starts to multi-feed the last
few sheets of paper in the tray, clean the
Base Pad (1) with a soft lint-free cloth
slightly moistened with water.
After cleaning, wipe the pad with a dry,
soft lint-free cloth to remove all moisture.
c Open the Jam Clear Cover (1) at the
back of the machine.
d Clean the Paper Pick-up Rollers (1) with
a soft lint-free cloth moistened with
water.
Slowly turn the rollers so that the whole
surface is cleaned.
After cleaning, wipe the rollers with a
dry, soft lint-free cloth to remove all
moisture.
e Close the Jam Clear Cover.
Make sure the cover is closed
completely.
f Put the paper tray firmly back in the
machine.
g Re-connect the power cord.
1
1
1

Table of Contents

Other manuals for Brother DCP-J925DW

Related product manuals