Brother DCP-J925DW - 1 General Setup; Important Note; Memory Storage; Setting Daylight Saving Time (MFC-J825 DW Only)

1
1
1
IMPORTANT NOTE 1
 In this manual, the LCD messages of the MFC-J825DW are used unless specified.
 Most of the illustrations in this User’s Guide show the MFC-J825DW.
Memory storage 1
(MFC-J825DW users only)
Your menu settings are stored permanently,
and in the event of a power failure will not be
lost. Temporary settings (for example,
Overseas Mode) will be lost. If you have
chosen Set New Default for your FAX,
SCAN or PHOTO’s preferred settings, those
settings will not be lost. Also, during a power
failure the machine will retain the date and
time and programmed fax timer jobs (for
example, Delayed Fax) for up to 24 hours.
(DCP-J925DW users only)
Your menu settings are stored permanently,
and in the event of a power failure will not be
lost. If you have chosen Set New Default,
settings in the Photo and Scan modes will
not be lost. Temporary settings will be lost.
Setting Daylight
Saving Time
(MFC-J825DW only)
1
You can set the machine to change for
daylight saving time. When selecting On it will
forward the time by an hour and backward
one hour when selecting Off. Make sure you
have set the correct date and time in the
Date&Time setting.
a Press Menu.
b Press a or b to display
General Setup.
c Press General Setup.
d Press a or b to display
Daylight Save.
e Press Daylight Save.
f Press Off (or On).
g Press Stop/Exit.
General setup 1