Brother DCP-T220

2. Remove the ink tank cap for the colour you want to refill, and place it on the back of the cover, as shown.
NOTE
Be careful to avoid touching any ink when handling the ink tank cap.
3. Remove the ink bottle cap, remove the film from the ink bottle, and then replace the cap.
IMPORTANT
• Replace the ink bottle cap tightly. Otherwise, the ink may leak.
• DO NOT shake the ink bottles. If ink stains your skin or clothing, wash with soap or detergent at once.
4. Remove the nozzle cap, as shown.
5. Make sure that the colour of the ink tank cap matches the ink colour you want to refill.
Keep the nozzle close to the ink tank opening and insert the bottle nozzle firmly into the ink tank so that the
ink does not spill.
186