Home > Machine Settings > Change Machine Settings Using Web Based Management > General
Settings > Set the Machine to Power Off Automatically
Set the Machine to Power Off Automatically
The Auto Power Off feature can reduce power consumption. Set the amount of time that the machine must be in
Sleep Mode before it automatically powers off. When this feature is set to off, you must power off the machine
manually.
To turn on the machine after the Auto Power Off feature has turned it Off, press (Stop).
(DCP-T420W/DCP-T425W)
The machine does not power off automatically when:
• The machine is connected to a wireless network.
• Wi-Fi is set to On.
1. Start Brother iPrint&Scan.
• Windows
Launch
(Brother iPrint&Scan).
• Mac
In the Finder menu bar, click Go > Applications, and then double-click the iPrint&Scan icon.
The Brother iPrint&Scan screen appears.
2. If your Brother machine is not selected, click the Select your Machine button, and then select your model
name from the list. Click OK.
3. Click
(Machine Settings) to configure the settings.
4. If required, type the password in the Login field, and then click Login.
The default password to manage this machine’s settings is located on the back of the machine and marked
"Pwd".
5. Go to the navigation menu, and then click General > Auto Power Off.
Start from
, if the navigation menu is not shown on the left side of the screen.
6. Click the Auto Power Off drop-down list, and then select the option you want.
7. Click Submit.
Related Information
• General Settings
Related Topics:
• Set Sleep Mode Countdown
• Access Web Based Management
220
To Next Page
Loading...
