Brother DCP-T300 - Additional Sending Operations; Sending a Fax Manually; Sending a Fax at the End of a Conversation; Broadcasting

Sending a fax (MFC model only)
9
3
Additional sending
operations
3
Sending a fax manually 3
Manual transmission lets you hear the
dialing, ringing and fax-receiving tones while
sending a fax.
NOTE
To send a multi-page fax, use the ADF.
a Load your document.
b Press (FAX).
c To listen for a dial tone, press
Teléfono (Hook).
d Enter the fax number.
e When you hear the fax tones, press
Inicio Negro (Black Start).
If you are using the scanner glass, press
1 to send the fax.
Sending a fax at the end of a
conversation 3
At the end of a conversation, you can send a
fax to the other party before you both hang
up.
a Ask the other party to wait for fax tones
(beeps) and then to press the Start or
Send key before hanging up.
b Load your document.
c Press (FAX).
d Press Inicio Negro (Black Start).
 If you are using the scanner glass,
press 1 to send a fax.
e Replace the handset of the external
phone.
Broadcasting 3
Broadcasting is automatically sending the
same fax message to more than one fax
number. You can include Groups, Speed Dial
numbers, and up to 50 manually dialed
numbers in the same broadcast.
After the broadcast is finished, a Broadcast
Report will be printed.
Before you begin the broadcast 3
Speed Dial numbers must be stored in the
machine's memory before they can be used
in a broadcast. (See Basic User’s Guide:
Storing Speed Dial numbers.)
Group numbers must also be stored in the
machine's memory before they can be used
in a broadcast. Group numbers include many
stored Speed Dial numbers for easier dialing.
(See Setting up Groups for Broadcasting
on page 19.)
How to broadcast a fax 3
a Load your document.
b Press (FAX).
c Enter a fax number.
Press OK.
You can use either a Speed Dial, a
Group or a manually entered number
using the dial pad.
d Repeat step c until you have entered
all the fax numbers to be included in the
broadcast.