Brother DCP-T300 - Overseas Mode; Checking and Canceling Waiting Jobs

Sending a fax (MFC model only)
11
3
f Enter the fax number.
g Press Inicio Negro (Black Start).
Sending in real time for the next fax
only
3
a Press (FAX).
b Press Menú (Menu), 3, 2, 3.
c Press a or b to choose
Next Fax Only. Press OK.
d Press a or b to choose Next Fax:Off
or Next Fax:On .
e Press OK.
f Press 2 so you can continue sending
your fax.
g Load your document.
h Enter the fax number.
i Press Inicio Negro (Black Start).
NOTE
• If the memory is full and you are sending a
fax from the ADF, the machine will send
the document in real time (even if
Real Time TX is set to Off).
• In Real Time Transmission, the automatic
redial feature does not work when you are
using the scanner glass.
• If the memory is full, faxes from the
scanner glass cannot be sent until you
clear some of the memory.
Overseas Mode 3
If you are having difficulty sending a fax
overseas due to possible interference on the
telephone line, we recommend that you turn
on Overseas Mode. After you send a fax
using this feature, the feature will turn itself
off.
a Load your document.
b Press (FAX).
c Press Menú (Menu), 3, 2, 4.
d Press a or b to choose On (or Off).
Press OK.
e Press 2 so you can continue sending
your fax.
f Enter the fax number.
g Press Inicio Negro (Black Start).
Checking and canceling
waiting jobs 3
You can check which jobs are still waiting in
the memory to be sent and cancel a job.
(If there are no jobs, the LCD displays
No Jobs Waiting.)
a Press Menú (Menu), 3, 5.
Any waiting jobs appear on the LCD.
b Press a or b to scroll through the jobs
and choose the job you want to cancel.
Press OK.
c Do one of the following:
 Press 1 to cancel it.
 Press 2 to exit without canceling.
d Repeat steps b and c for each job you
want to cancel.
e When you are finished, press
Detener/Salir (Stop/Exit).