Brother DCP-T300 - Lcd; LCD Contrast; Mode Timer (MFC Model Only)

Chapter 1
4
LCD 1
LCD Contrast 1
You can adjust the LCD contrast. If you are
having difficulty reading the LCD, try
changing the contrast setting.
(MFC-T800W)
1
a Press Menú (Menu), 2, 5.
b Press a or b to choose Light or Dark.
Press OK.
c Press Detener/Salir (Stop/Exit).
(DCP-T300, DCP-T500W and DCP-T700W)
1
a Press Menú (Menu).
b Press a or b to choose
0.Initial Setup.
Press OK.
c Press a or b to choose
2.LCD Contrast.
Press OK.
d Press a or b to choose Light or Dark.
Press OK.
e Press Detener/Salir (Stop/Exit).
Mode Timer
(MFC model only)
1
The machine’s control panel has three
temporary mode keys: FAX,
ESCÁNER (SCAN) and COPIA (COPY).
You can change the amount of time the
machine takes after the last SCAN or COPY
operation before it returns to FAX mode. If
you choose Off, the machine stays in the
mode you used last.
a Press Menú (Menu), 2, 1.
b Press a or b to choose 0 Sec,
30 Secs, 1 Min, 2 Mins, 5 Mins or
Off.
Press OK.
c Press Detener/Salir (Stop/Exit).