Brother DCP-T525W - Send a Fax Manually

Home > Fax > Send a Fax > Send a Fax Manually
Send a Fax Manually
Related Models: MFC-T920DW/MFC-T925DW
Manual fax transmission lets you hear the dialling, ringing and fax-receiving tones while sending a fax.
NOTE
This feature is available only for monochrome faxes.
(Not available in South Africa)
1. Load your document.
2. Press
(FAX).
3. Press Hook and listen for a dial tone.
4. Enter the fax number.
5. When you hear fax tones, press Mono Start.
• If you are using the scanner glass, press c to send a fax.
(For South Africa only)
To send a fax manually, do the following:
Load your document. To listen for a dial tone, pick up the handset of the external telephone. Dial the fax number
using the external telephone. When you hear fax tones, press Mono Start. If you are using the scanner glass,
press c to send a fax.. Replace the handset of the external phone.
Related Information
• Send a Fax
146