Brother DCP-T525W - Clean the Paper Feed Rollers

Home > Routine Maintenance > Clean Your Brother Machine > Clean the Paper Feed Rollers
Clean the Paper Feed Rollers
If the paper feed rollers are stained with ink or have a buildup of paper dust, it may cause paper feed problems.
1. Unplug the machine from the electrical socket.
2. If the paper support flap is open, close it, and then close the paper support.
3. Pull the paper tray (1) completely out of the machine.
1
4. Clean the front side of the Paper Feed Rollers (1) with a soft lint-free cloth moistened with water, using a
side-to-side motion. After cleaning, wipe the rollers with a dry, soft lint-free cloth to remove all moisture.
1
5. (DCP-T720DW/DCP-T725DW/DCP-T820DW/DCP-T825DW/MFC-T920DW/MFC-T925DW) Lift the flap (2),
and then clean the back side of the Paper Feed Rollers (1) with a soft lint-free cloth moistened with water.
After cleaning, wipe the rollers with a dry, soft lint-free cloth to remove all moisture.
21
6. Slowly push the paper tray completely into the machine.
7. Reconnect the power cord.
415