Brother DCP-T525W - Print the Network Configuration Report

Home > Network > Network Features > Print the Network Configuration Report
Print the Network Configuration Report
The Network Configuration Report lists the network configuration, including the network print server settings.
• Node Name: The Node Name appears on the current Network Configuration Report. The default Node
Name is "BRNxxxxxxxxxxxx" for a wired network or "BRWxxxxxxxxxxxx" for a wireless network (where
"xxxxxxxxxxxx" is your machine's MAC Address / Ethernet Address.)
• If the IP Address on the Network Configuration Report shows 0.0.0.0, wait for one minute and try
printing it again.
• You can find your machine's settings, such as the IP address, subnet mask, node name, and MAC
Address on the report, for example:
- IP address: 192.168.0.5
- Subnet mask: 255.255.255.0
- Node name: BRN000ca0000499
- MAC Address: 00-0c-a0-00-04-99
>> DCP-T520W/DCP-T525W/DCP-T720DW/DCP-T725DW/DCP-T820DW/DCP-T825DW
>> MFC-T920DW/MFC-T925DW
DCP-T520W/DCP-T525W/DCP-T720DW/DCP-T725DW/DCP-T820DW/DCP-T825DW
1. Press Menu.
2. Press a or b to select the [Print Reports] option. Press OK.
3. Press a or b to select the [Network Config] option. Press OK.
4. Press the Mono Start or Colour Start button.
The machine prints the current Network Configuration Report.
MFC-T920DW/MFC-T925DW
1. Press Settings.
2. Press a or b to make your selections:
a. Select [Print Reports]. Press OK.
b. Select [Network Config]. Press OK.
3. Press c.
The machine prints the current Network Configuration Report.
Related Information
• Network Features
Related Topics:
• Access Web Based Management
• Use the Network Connection Repair Tool (Windows)
• If You Are Having Difficulty with Your Machine's Network
• Error and Maintenance Messages
• Check the Brother Machine's Network Settings
265