Brother DCP-T525W - Access Web Based Management

Level 1 Descriptions
Firmware Update
Update your machine to the latest firmware.
Firmware Auto Check
View firmware information on the Home screen.
Page Counter
Display the printed pages.
Settings > [Initial Setup]
Level 1
Level 2 Descriptions
Date & Time Date
Add the date and time on the screen and in the headings of the
faxes you send.
Time
Clock Type
Select the time format (12-hour or 24-hour).
Auto Daylight
(Available only for
some countries.)
Set the machine to change automatically for Daylight Saving
Time.
Daylight Save
(Available only for
some countries.)
Change for Daylight Saving Time manually.
Station ID Fax
Enter your name and fax number so it appears on each page
you fax.
Name
Tone/Pulse
(Available only for some
countries.)
- Select the dialling mode.
Fax Auto Redial
- Set the machine to redial the last fax number if the fax did not
go through because the line was busy.
Dial Tone
- Shorten the dial tone detect pause.
Phone Line Set
(Available only for some
countries.)
- Select the telephone line type.
Compatibility
- Adjust the equalisation for transmission difficulties.
VoIP service providers offer fax support using various
standards. If you regularly experience fax transmission errors,
select Basic (for VoIP).
Reset Machine Reset
Restore all the machine's settings that you have changed,
such as Date and Time.
Network
Restore all network settings back to the factory settings.
Address Book &
Fax
Erase all stored phone numbers and fax settings.
All Settings
Restore all the machine's settings back to the factory settings.
Local Language
(Available only for some
countries.)
- Change your LCD language.
Related Information
• Settings and Features Tables
468