Brother FAX-2800 User Manual

USING THE BROTHER MFC WITH A NEW POWER MACINTOSH
®
G3, G4 OR IMAC™ /IBOOK 18 - 11
PreScanning an Image
PreScanning allows you to scan an image quickly at a low resolution. A
thumbnail version will appear in the Scanning Area. This is only a preview of
the image, so you can see how it will look. The PreScan button is used to
preview an image for any unwanted portions. When you are satisfied with the
preview, click Start to scan the image.
1 Insert the original face down in the ADF.
2 Click PreScan.
The entire original will be scanned into your Macintosh G3 or iMac and will
appear in the Scanning Area of the Scanner dialog box:
3 To scan a portion of the
prescanned image, click and
drag the mouse to crop it.
4 Insert original in the ADF of the Brother MFC again.
5 Adjust the settings for Resolution, Color Type (Gray Scale), Brightness,
Contrast, and Size in the Scanner Setup dialog box, as needed.
6 Click Start.
This time only the selected area of the original will appear in the Scanning Area.
7 Use your application, software for editing and refining the image as usual.

Brother FAX-2800 Specifications

General

Automatic Document Feeder (ADF)	Yes
Modem Speed	33.6 Kbps
ADF Capacity	20 sheets
Paper Tray Capacity	250 sheets
Memory Transmission	Yes
Copier Function	Yes
Printing Technology	Laser
Transmission Speed	33.6 Kbps
Type	Plain Paper Fax
Resolution	600 x 600 dpi
Memory	512 KB
Fax Transmission Speed	6 seconds per page
Out-of-Paper Reception	Yes
Speed Dials	100
Paper Handling	Letter, Legal, A4