Why does Brother Printer produce waves in the paper / folds in the paper at the eject roller?
If you notice waves or folds in the paper as it exits your Brother printer's eject roller, check for any foreign objects around the eject roller and remove them. If the problem persists, the eject roller itself may be failing, requiring replacement of the top cover ASSY.
How to fix wrinkles or creases on Brother Printer prints?
If your Brother printer is producing wrinkled or creased paper, a foreign object might be inside the fuser unit. Remove any foreign objects inside of the eject roller. If the issue continues, the fuser unit itself may be failing and require replacement.
Why is my Brother HL-2130 Printer paper feeding at an angle?
If your Brother printer is feeding paper at an angle, the main PCB might be failing and needs to be replaced.
Why is my Brother HL-2130 Printer printing wrinkles or creases on the paper?
If your Brother printer is producing wrinkled or creased prints, it could be due to: * A foreign object inside the fuser unit. Remove it. * The fuser unit itself failing, requiring replacement.
Why is my Brother Printer leaving dirt on the paper?
If your Brother printer is leaving dirt on the paper, the fuser unit might be dirty. Clean the entrance of the fuser unit, or clean the pressure roller.
Why is my Brother Printer feeding paper at an angle?
If your Brother printer is feeding paper at an angle, the main PCB might be faulty and require replacement.
Why is the paper curling when printed from my Brother HL-2130?
If the paper is curling after being printed by your Brother printer, the fuser unit might be failing and require replacement.
What to do when Brother All in One Printer says toner ended?
If your Brother All in One Printer displays 'Toner Ended', it means it is time to replace the toner cartridge with a new one.
Why does my Brother All in One Printer say cooling down wait for a while?
If your Brother All in One Printer displays 'Cooling Down Wait for a while', the drum unit or toner cartridge is too hot, and the machine has paused to cool down. Ensure the fan is spinning and the exhaust outlet isn't blocked. If the fan works, clear any obstructions around the exhaust and let the machine sit powered on for several minutes. If the fan isn't spinning, disconnect and reconnect the machine to power.
Why is duplex disabled on my Brother All in One Printer?
If 'Duplex Disabled' appears on your Brother All in One Printer, it means the duplex tray is either removed or not correctly installed. Make sure to carefully put the duplex tray into the machine until it clicks into place. Also, ensure that the back of the machine is completely closed.
General| Network ready | No |
|---|---|
| N-up printing | 2, 4, 16, 25 |
| Print technology | Laser |
| Maximum resolution | 2400 x 600 DPI |
| Time to first page (black, normal) | 10 s |
| Print speed (black, normal quality, A4/US Letter) | 20 ppm |
| Maximum duty cycle | - pages per month |
| Number of print cartridges | 1 |
| Maximum internal memory | - MB |
| Sound power level (standby) | 31 dB |
| Sound pressure level (printing) | 53 dB |
| Display | LED |
| Total input capacity | 250 sheets |
| Total output capacity | 100 sheets |
| Custom media width | 69.9 - 215.9 mm |
| Maximum print size | 216 x 406 mm |
| Custom media length | 116 - 406.4 mm |
| Paper tray media types | Bond paper, Plain paper, Recycled paper |
| Paper tray media weight | 60 - 105 g/m² |
| Non-ISO print media sizes | Letter |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5, B6 |
| Multi-purpose tray media types | Bond paper, Envelopes, Heavyweight paper, Labels, Plain paper, Recycled paper, Transparencies |
| Maximum ISO A-series paper size | A4 |
| Multi-Purpose Tray media weight | 60 - 163 g/m² |
| Standard interfaces | USB 2.0 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 62 W |
| Power consumption (printing) | 421 W |
| Power consumption (PowerSave) | 0.8 W |
| Package weight | 8000 g |
| Power LED | Yes |
| Sustainability certificates | ENERGY STAR |
| Mac operating systems supported | Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion |
| Windows operating systems supported | Windows 2000, Windows 2000 Professional, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64 |
Weight and Dimensions| Dimensions (WxDxH) | 368 x 360 x 183 mm |
|---|
To Next Page
