How to fix out of memory error on Brother All in One Printer?
If your Brother All in One Printer shows 'Out of Memory', the machine’s memory is full. You can press Start to copy the scanned pages, or press Stop/Exit and wait for other operations to finish before trying again. Reducing the print resolution may also help.
How to solve fuser error on Brother All in One Printer?
A 'Fuser Error' on your Brother All in One Printer indicates that the fuser unit's temperature isn't rising correctly. Turn the printer off, wait a few seconds, and then turn it back on. Leave the machine powered on for 15 minutes.
What is drum error on Brother All in One Printer?
A 'Drum Error' on your Brother All in One Printer means the corona wire on the drum unit needs cleaning. Clean the corona wire on the drum unit.
What does EL error mean on Brother All in One Printer?
If your Brother All in One Printer displays an 'EL Error', the machine has a mechanical problem. Open the front cover and close it again.
Why does my Brother All in One Printer say manual feed?
The 'Manual Feed' message on your Brother All in One Printer means manual feed was selected as the paper source, but there's no paper in the manual feed slot. Place a sheet of paper in the manual feed slot.
What does 'Size Error DX' mean on my Brother All in One Printer and how to resolve it?
If your Brother All in One Printer displays 'Size Error DX', it means the paper in the tray is not a suitable size for automatic duplex printing. Load A4 paper for automatic duplex printing, and then press Start.
What to do if my Brother All in One Printer displays 'Out of Memory'?
If your Brother All in One Printer’s memory is full during fax sending or copying: Press Start to send or copy the scanned pages, or press Stop/Exit and wait for other operations to finish. You can also clear faxes from memory by printing them, then turn off Fax Storage. If a print operation is in process, reduce the print resolution or clear faxes from memory.
What to do if my Brother All in One Printer displays 'BT Call Sign On (U.K. only)'?
If your Brother All in One Printer displays 'BT Call Sign On (U.K. only)', it means BT Call Sign is set to On, preventing you from changing the Receive Mode from Manual. Set BT Call Sign to Off to resolve this.
What does 'Fuser Error' mean on my Brother All in One Printer and how to resolve it?
If your Brother All in One Printer displays 'Fuser Error', it means the temperature of the fuser unit did not rise to the specified temperature within the specified time. Turn the power off, wait a few seconds, and then turn it on again. Leave the machine for 15 minutes with the power on.
How to fix no toner error on Brother All in One Printer?
If your Brother All in One Printer displays 'No Toner', the toner cartridge isn't correctly installed. Pull out the drum unit, remove the toner cartridge, and then put it back into the drum unit.
General| Network ready | No |
|---|---|
| N-up printing | 2, 4, 16, 25 |
| Print technology | Laser |
| Maximum resolution | 2400 x 600 DPI |
| Time to first page (black, normal) | 10 s |
| Print speed (black, normal quality, A4/US Letter) | 20 ppm |
| Maximum duty cycle | - pages per month |
| Number of print cartridges | 1 |
| Maximum internal memory | - MB |
| Sound power level (standby) | 31 dB |
| Sound pressure level (printing) | 53 dB |
| Display | LED |
| Total input capacity | 250 sheets |
| Total output capacity | 100 sheets |
| Custom media width | 69.9 - 215.9 mm |
| Maximum print size | 216 x 406 mm |
| Custom media length | 116 - 406.4 mm |
| Paper tray media types | Bond paper, Plain paper, Recycled paper |
| Paper tray media weight | 60 - 105 g/m² |
| Non-ISO print media sizes | Letter |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5, B6 |
| Multi-purpose tray media types | Bond paper, Envelopes, Heavyweight paper, Labels, Plain paper, Recycled paper, Transparencies |
| Maximum ISO A-series paper size | A4 |
| Multi-Purpose Tray media weight | 60 - 163 g/m² |
| Standard interfaces | USB 2.0 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 62 W |
| Power consumption (printing) | 421 W |
| Power consumption (PowerSave) | 0.8 W |
| Package weight | 8000 g |
| Power LED | Yes |
| Sustainability certificates | ENERGY STAR |
| Mac operating systems supported | Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion |
| Windows operating systems supported | Windows 2000, Windows 2000 Professional, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64 |
Weight and Dimensions| Dimensions (WxDxH) | 368 x 360 x 183 mm |
|---|
To Next Page
