Installing the Printer Driver
40
STEP 2
Macintosh
®
Macintosh
®
Wireless
Network
Configuration using the automatic wireless (one-push) method
If your wireless access point supports either
SecureEasySetup™, Wi-Fi Protected Setup™
(PBC
1
) or AOSS™, you can configure the machine
easily without a computer. By pushing a button on the
wireless LAN router / access point and the machine,
you can setup the wireless network and security
settings. See the user’s guide for your wireless LAN
router / access point for instructions on how to access
one-push mode.
1
Push Button Configuration
Note
Routers or access points that support
SecureEasySetup™, Wi-Fi Protected Setup™ or
AOSS™ have the symbols shown below.
Configure the wireless settings
1 Make sure the printer power switch is on.
2 Turn on your Macintosh
®
. Put the supplied CD-
ROM into your CD-ROM drive.
3 Double-click the HL2100 icon on your desktop.
Double-click the Start Here icon. Follow the
on-screen instructions.
4 Click Install Printer Driver on the menu
screen.
5 Click Wireless Network users.
6 Choose Wireless Setup and Driver Install
(Recommended), and then click Next.
To Next Page
Loading...
