Installing the Printer Driver
23
Macnintosh
®
Macnintosh
®
USB
4
For USB interface cable users
Connecting the printer to your Macintosh
®
and
installing the driver
1 Connect the USB interface cable to your
Macintosh
®
, and then connect it to the printer.
Improper Setup
DO NOT connect the printer to a USB port on a
keyboard or a non-powered USB hub.
2 Make sure the printer power switch is on.
3 Click Install Printer Driver on the menu
screen.
4 Click USB cable users and follow the
on-screen instructions. Then, restart your
Macintosh
®
.
For Mac OS
®
X 10.2.4 to 10.2.8 users:
Go to step 7.
For Mac OS
®
X 10.3 or greater users:
Go to step 5.
5 The Brother software will search for the Brother
printer. During this time the following screen
will appear.
Note
If more than one printer is available, the following
list appears. Choose the printer you wish to
connect, and then click OK.
6 When this screen appears, click OK.
For Mac OS
®
X 10.3 or greater users:
Setup is now complete.
7 When this screen appears, click Add.
To Next Page
Loading...
