Brother HL-4070CDW - For Wired Network Interface Cable Users

Installing the Printer Driver
20
STEP 2
Windows
®
Windows
®
Wired
Network
3 For wired network interface cable users
For Peer-to-Peer network printer users
1 Router
2 Network printer
Note
• If you are going to connect the printer to your
network, we recommend that you contact your
system administrator prior to installation or see the
Network User’s Guide on the CD-ROM.
• If you are using Personal Firewall software (e.g.
Windows Firewall), disable it. Once you are sure
that you can print, restart your Personal Firewall
software.
Connecting the printer to your network and
installing the driver
1 Click Install Printer Driver on the menu
screen.
Note
Choose the Install Printer Driver icon for your
region.
2 Click Network cable users.
Note
• For Windows Vista™, when the User Account
Control screen appears, click Continue.
• If you want to install the PS driver (Brother’s
BR-Script Driver), choose Custom setup and
then follow the on-screen instructions. When the
Select Components screen appears, check
PS(PostScript Emulation) Driver, and then
continue following the on-screen instructions.
3 Turn off the printer power switch.
4 Connect the network interface cable to the
printer, and then connect it to a free port on
your hub.
5 Turn on the printer power switch.
TCP/IP
TCP/IP
Windows
R
Macintosh
R
2
1