Other Information
67
14 Insert the original orange packing material for
the drum unit as shown in the illustration, and
then close the front cover.
15 Two people should place the printer into the
plastic bag and put the printer and the
Styrofoam pieces into the carton. Match the
front side of the printer to the “FRONT”
mark (1) on the Styrofoam pieces. Put the
Styrofoam piece for the toner cartridges (2) on
top of the printer.
16 Put the toner cartridges into the Styrofoam
piece.
17 Put the two carton trays (1) (2) on the top and
put the waste toner box in the tray placed
towards the front side of the printer (1).
18 Close the carton and tape it shut.
1
2
1
2
To Next Page
Loading...
