Brother HL-4150CDN - General Setup

Control Panel
73
3
General Setup 3
Submenu Menu Selections Options Descriptions
Local Language English*/Français... Changes the LCD language for your
country.
Ecology Sleep Time 0/1/2/3*/4/5...Min Sets the time to return to Power Save
mode.
Toner Save Off*/On Increases the page yield of the toner
cartridge.
Panel Control Button Repeat 0.1*/0.4/0.6/0.8/1.0/
1.4/1.8/2.0 Sec
Sets the time for the LCD message to
change when holding + or - at
intervals.
Message Scroll
Level 1 * / Level 2 .../ Level 10 Sets the time in seconds that an LCD
message will scroll across the LCD.
From Level 1=0.2 sec to Level
10=2.0 sec.
LCD Contrast -nnonn+ Adjusts the contrast of the LCD.
Auto Online On*/Off Sets the machine to the mode which
automatically returns to Ready state.
Setting Lock Off*/On Turns the lock panel settings On or
Off using the password.
Reprint Off*/On Turns the reprint settings On or Off.
Interface Select Auto*/USB/Network Chooses the interface you use.
If you choose Auto, the machine
automatically changes the interface
to USB or Ethernet depending on
which interface is receiving data.
Auto IF Time 1/2/3/4/5*.../99 (Sec) You need to set the time-out period
for the auto interface selection.
Input Buffer Level 1/2/3/4*.../7 Increases or decreases the input
buffer capacity.
The factory settings are shown in Bold with an asterisk.