Brother HL-5040 - Page 117

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
4-20
(4) Remove the two cup B M3x8 Taptite screws, and then remove the panel PCB ASSY.
(5) Remove the SW key A, the SW key B and the panel light guide from the top cover ASSY.
Fig. 4-33
(6) Remove the panel light guide 2 and the diffusion film from the panel guide.
Fig. 4-34
Taptite, cup B M3x8
Panel light guide 2
Diffusion film
SW key B
Panel light guide
Panel light
guide
SW key A
Top cover ASSY
Panel PCB ASSY