Brother HL-5040 - Control Panel Operation; Control Panel Buttons & LED Functions; Leds; Control Panel Buttons

CHAPTER 2 INSTALLATION AND BASIC OPERATION
2-28
5. CONTROL PANEL OPERATION
There are four LEDs (Toner, Drum, Paper, Status) and the two control panel buttons (Job
Cancel, Go) on the control panel.
Fig. 2-33
5.1 Control Panel Buttons & LED functions
5.1.1 LEDs
1) Toner LED indicates when the Toner is low or empty.
2) Drum LED indicates when the Drum is nearing end of life.
3) Paper LED indicates when there is a paper jam.
4) Status LED will flash and change color depending on the printer status.
5.1.2 Control Panel Buttons
1) Job Cancel Button will stop and cancel the print operation in progress.
2) Go Button continue printing/ Form feed.
LEDs
Control Panel Button
Control Panel Button