Brother HL-5040 - LED Indications

HL-5030/5040/5050/5070N SERVICE MANUAL
2-29
5.2 LED Indications
NOTE: When the power switch is off or the printer is in Sleep mode, all the LEDs are off.
LED Printer status
Toner
Drum
Paper
Status
Fig.2-34
Sleep mode
The power switch is off or the printer is in Sleep mode. Pressing the Go
button wakes up the printer from Sleep mode to Warming up mode. After
warming up, the printer will be Ready state.
Toner
Drum
Paper
Status
Fig.2-35
Warming up
The printer is warming up.
Toner
Drum
Paper
Status
Fig.2-36
Ready to print
The printer is ready to print.
Toner
Drum
Paper
Status
Fig.2-37
Receiving data
The printer is either receiving data from the computer, processing data in
memory or printing the data.
Toner
Drum
Paper
Status
Fig.2-38
Data remaining in memory
Print data remains in the printer memory. If the Status LED is on for a long
time and nothing has printed, press the Go button to print the remaining
data.