Brother HL-5250DN series User Manual

7, Troubleshooting
94 mm
(3.7 in.)
94 mm
(3.7 in.)
White Spots on black text
and graphics at 94 mm
(3.7 in.) intervals
94 mm
(3.7 in.)
94 mm
(3.7 in.)
Black Spots at 94 mm
(3.7 in.) intervals
If the problem is not solved after printing a few pages, the drum unit may have
glue from the label stuck on the OPC drum surface.
Clean the drum unit as follows:
Put the print sample in front of the drum unit, and find the exact position of
the poor print.
@ Turn the drum unit gear by hand while looking at the surface of the OPC
drum (1).
When you have found the mark on the drum that matches the print sample,
wipe the surface of the OPC drum with a cotton swab until the dust or paper
powder on the surface comes off.
DO NOT clean the surface of the photosensitive drum with a sharp object.
m The drum unit may be damaged. Put in a new drum unit. See Replacing the drum
unit on page 68.
93

Brother HL-5250DN series Specifications

General

Interface	Ethernet 10/100 Base-TX
Connectivity Technology	Wired
Data Link Protocol	Ethernet, Fast Ethernet
Ports Qty	1
Type	Print server
Product Type	Print server
Network Protocols	TCP/IP
Features	SNMP support
Compliant Standards	IEEE 802.3
Compatible Printers	Brother HL-5250DN
Operating Systems Supported	Linux