Brother HL-5380DN - Consumables

Control Panel
95
4
NETWORK 4
1
On connection to the network, if the machine's 'BOOT METHOD' is 'AUTO' the machine will attempt to automatically set the IP address and Subnet
Mask from a boot server such as DHCP or BOOTP. If a boot server cannot be found an APIPA IP address will be allocated, such as
169.254.[001-254].[000-255]. If the 'BOOT METHOD' of the machine is set to 'STATIC' you will need to manually enter an IP address from the
machine's control panel.
Submenu Menu Selections Options Descriptions
TCP/IP BOOT METHOD AUTO*/STATIC/RARP/BOOTP
/DHCP
Chooses the IP method that best
suits your needs.
IP ADDRESS= [000-255] . [000-255] .
[000-255] . [000-255]
[000-000] . [000-000] .
[000-000] . [000-000]*
1
Enter the IP address.
SUBNET MASK= [000-255] . [000-255] .
[000-255] . [000-255]
[000-000] . [000-000] .
[000-000] . [000-000]*
1
Enter the Subnet mask.
GATEWAY= [000-255] . [000-255] .
[000-255] . [000-255]
[000-000] . [000-000] .
[000-000] . [000-000]*
Enter the Gateway address.
IP BOOT TRIES # (3)*
APIPA ON*/OFF Automatically allocates the IP
address from the link-local address
range.
1
IPV6 ON /OFF*
ETHERNET AUTO*/100B-FD/100B-HD/
10B-FD/10B-HD
Chooses Ethernet link mode.
FACTORY RESET RESTART PRINTER?
The default settings are shown in Bold with an asterisk.