Control Panel
89
4
PAPER 4
1
Tray2 and Tray3 are options.
QUALITY 4
SETUP 4
Submenu Options Descriptions
SOURCE AUTO*/MP/TRAY1/TRAY2/TRAY3 Chooses the tray that will be used.
PRIORITY MP>T1>T2>T3*/T1>T2>T3>MP/
T1>T2>T3
When SOURCE is chosen as AUTO: Chooses the
order in which the printer uses the paper trays that
contain paper of the same size.
MP FIRST OFF*/ON Chooses whether to feed paper from the MP tray as
a priority.
MP SIZE ANY*/LETTER/LEGAL/A4... Chooses the size of paper you put in the MP tray.
MP MEDIA FIX OFF*/PLAIN PAPER/THIN
PAPER...
Chooses the media type of paper you put in the MP
tray. When you choose the media type here (except
OFF), the setting for Media Type selected in the
printer driver will be ignored.
MANUAL FEED OFF*/ON Chooses whether you want to feed paper manually.
TRAY1 SIZE ANY*/LETTER/LEGAL/A4... Chooses the size of paper you loaded in the
standard paper tray.
TRAY2 SIZE
1
ANY*/LETTER/LEGAL/A4... Chooses the size of paper you loaded in the
optional lower tray.
TRAY3 SIZE
1
ANY*/LETTER/LEGAL/A4... Chooses the size of paper you loaded in the
optional lower tray.
DUPLEX OFF*/ON(LONG
BIND)/ON(SHORT BIND)
Chooses whether you want to automatically print
on both sides of the paper.
The default settings are shown in Bold with an asterisk.
Submenu Options Descriptions
RESOLUTION 300/600*/HQ1200/1200 Chooses a print resolution 300, 600 or 1200 dots
per inch or HQ1200 (2400x600 dpi).
TONER SAVE OFF*/ON
DENSITY -6/-5/-4/-3/-2/-1/0*/1/2/3/4/5
/6
Increases or decreases the print density.
The default settings are shown in Bold with an asterisk.
Submenu Menu Selections Options Descriptions
LANGUAGE ENGLISH*/FRANÇAIS... Changes the LCD language for your
country.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
