21
8 Select Standard Installation, and then
click the Next button.
9 Select Local Printer, and then click the
Next button.
0 Select the port where your printer is
connected, and then click the Next button.
A Click the Finish button.
Setup is now complete.
If you want to install the PS driver, select Custom
Installation and then follow the instructions on
the screen. When the Select Components
screen appears, check PS Printer Driver, and
then continue following the instructions on the
screen.
If you want to register your product on-line,
check “On-Line Registration” box.
Setting Up
Your Printer
Windows
®
Parallel
For
Administrators
Installing the Driver
To Next Page
Loading...
