22
Installing the Driver
Connecting the Cable and Installing the Driver
1 Turn off the printer power switch.
2 Connect the network interface cable to the
printer, and then connect it to a free port on
your hub.
3 Turn on the printer power switch.
4 Insert the CD-ROM into your CD-ROM
drive. The opening screen will appear
automatically. If the language screen
appears, select your language.
5 Click Install Software on the Menu screen.
6 Click Printer Driver.
7 Click the Next button.
Follow the instructions on the screen.
For Network Interface Cable Users
For Brother Peer-to-Peer Network Printer Users
(LPR)
If you are going to connect the printer to your network, we recommended that you contact your system
administrator prior to installation.
Hub
Step 2
To Next Page
Loading...
