23
8 Select Standard Installation, and then
click the Next button.
9 Select Brother Peer-to-Peer Network
Printer, and then click the Next button.
0 Select Search the network for devices
and choose from a list of discovered
devices (Recommended).
Or enter your printer's IP address or its node
name.
Click the Next button.
A Select your printer and LPR
(Recommended), and then click the Next
button.
B Click the Finish button.
For Windows NT
®
4.0 and
Windows
®
2000/XP users:
Setup is now complete.
For Windows
®
95 / 98 / Me users:
After your PC has restarted, setup will
be complete.
If you want to install the PS driver, select Custom
Installation and then follow the instructions on
the screen. When the Select Components
screen appears, check PS Printer Driver, and
then continue following the instructions on the
screen.
Contact your Administrator about the
printer’s IP Address or node name.
If you want to register your product on-line,
check “On-Line Registration” box.
Setting Up
Your Printer
Windows
®
Network
For
Administrators
Installing the Driver
To Next Page
Loading...
