Brother HL-8050N - For Parallel Interface Cable Users

20
Installing the Driver
Connecting the Printer to Your PC and Installing the Driver
1 Turn off the printer power switch.
2 Connect the parallel interface cable to your
PC, and then connect it to your printer.
3 Turn on the printer power switch.
4 Insert the CD-ROM into your CD-ROM
drive. The opening screen will appear
automatically. If the language screen
appears, select your language.
5 Click Install Software on the Menu screen.
6 Click Printer Driver.
7 Click the Next button.
Follow the instructions on the screen.
For Parallel Interface Cable Users
If the Found New Hardware Wizard
appears on your PC, click the Cancel button.
C
A
N
C
E
L
Step 2