Brother KE-430C - Needle Bar Mechanism

3. DISASSEMBLY
３-８. Needle bar mechanism
3285
Q
3284
Q
KE-430B, 430C series
31
1. Rubber cap
2. Screw
3. Needle bar
4. Slide block
5. Needle bar clamp
[Pull out]
6. Rubber cap
7. Set screw [Loosen]
8. Wick
[Pull out from arm]
9. Thread take-up support
shaft
10. Thread take-up support
11. Oil cap
12. Set screw [Loosen]
13. Set screw [Loosen]
14. Ne
edle bar connect-
ing rod
3286Q
15. Ne
edle bearing
Do not remove the needle bar guide if possible to
preve
nt the machine from overheating due to needle
bar rubbing.
16. T
hread take-up lever
17. Rubber caps [2 pcs]
18. Screws [2 pcs]
19. Needle bar guide