5. SETTING FUNCTION
KE-430HX/KE-430HS, BE-438HX/BE-438HS
66
5-15. Split setting
1
Display the sewing programs which use split codes.
Select the sewing programs which use split codes can be selected by pressing the program number change key
or in the program select screen, so that they are displayed in the home screen.
* The 430H does not have any sewing programs which use split codes registered as standard programs, so it is
necessary to read sewing programs which have had split codes inserted when they were created from USB memory
and register them as additional programs. (For details on reading data, refer to "5-18-5. Reading additional pattern
data".)
2
Switch to the split setting screen.
Press the menu key to switch to the setting menu screen.
Touch the split setting in the setting menu screen to
switch to the split setting screen.
3
Select the split number.
From the split setting screen, touch the or
key (1) to set the number (2) of the sewing split section.
・ The setting values are displayed in the order in which
the split codes appear, and "1" indicates the sewing
start position.
4
Confirm the split number.
Once the split section to be sewn has been selected, you
can press the OK key to confirm the value which is
currently selected. The next sewing operation will start
from the selected split section.
If you touch the back key without touching the
OK key, you can cancel the changes.
* You can set whether to use single split mode or continuous split mode by using memory switch No. 451.
・ON=Single split mode
Only the split section which is selected in the split settings can be sewn.
・OFF=Continuous split mode
Sewing can be carried out from the split section which is selected in the split settings to the sewing end.
(1)
(2)
To Next Page
Loading...
Need help?
General
