5. SETTING FUNCTION
71
KE-430HX/KE-430HS, BE-438HX/BE-438HS
5-18-3. Reading all data
1
Select item No. "1" in the Read/Write data screen.
(Refer to “5-18-2. Preparation for reading/writing data”.)
2
Press the OK key .
・ The buzzer will sound and the sewing program data, cycle
program data, memory switch settings and additional
pattern data will be read from the USB memory and stored
in the sewing machine's memory.
・ If any one of additional program data, memory switch data,
sewing pattern data or cycle program data does not exist in
the USB memory, an error buzzer will sound.
3
When the display returns to the status in step 1, writing of the
sewing machine data is complete.
・ If you would like to use any other read/write modes, press
the or key to select the mode and then run it.
4
Exit read/write mode
・ At the Read/Write data screen, you can press the back key or the menu key to return to the
setting menu.
・ In addition, when the home key is pressed, the display switches to the home screen.
To Next Page
Loading...
Need help?
General
