Brother LK3-B430E MARK II User Manual

iv
LK3-B430E Mark II
Safety devices
Eye guard
Finger guard
Thread take-up cover
Thread take-up solenoid cover
Belt cover
Motor cover, etc.
2
3
Be sure to connect the ground. If the ground connection is not secure, you run a high risk of receiving a
serious electric shock, and problems with correct operation may also occur.
The following warning labels appear on the sewing machine.
Please follow the instructions on the labels at all times when using the machine. If the labels have been removed or are
difficult to read, please contact your nearest Brother dealer.
3. Warning labels
1
Moving parts
may cause injury.
Operate with safety devices.
Turn off main switch before
threading, changing bobbin
and needle, cleaning etc.
Hazardous voltage
will cause injury.
Turn off main
switch and wait 5
minutes before
opening this cover.
Un voltage non adapté
provoque des blessures.
Eteindrel'interrupteur et
attendre 5 minutes
avantd' ouvrir le capot
Hochspannung
verletzungsgefahr!
Bitte schalten sie den
hauptschalter aus und
warten sie 5 minuten,
bevor sie diese
abdeckung öffnen.
Un voltaje inadecuado
puede provocar las
heridas.
Apagar el interruptor
principal y esperar 5
minutos antes de abrir
esta cubierta.
Eye guard
Thread take-up
solenoid cover
Thread take-up cover
Finger guard
2
Belt
cover
Motor cover
3
1

Brother LK3-B430E MARK II Specifications

General

Brand	Brother
Model	LK3-B430E MARK II
Category	Sewing Machine
Language	English