Brother MFC-420CN User Manual

3 - 4 SETUP SEND
Faxing from the scanner glass
You can use the scanner glass to fax pages of a book or one page
at a time. The documents can be up to letter size. To cancel, press
Stop/Exit
.
1
If it is not illuminated in green, press (
Fax
).
2
Load your document on the scanner glass.
3
Dial the fax number.
Press
Black Start
or
Color Start
.
The MFC starts scanning the first page.
If you press
Color Start
, the MFC starts sending.
4
To send a single page, press
2
(or
press
Black Start
again).
The MFC starts sending the
document.
—OR—
To send more than one page, press
1
and go to Step 5.
5
Place the next page on the scanner
glass.
Press
Menu/Set
.
The MFC starts scanning. (Repeat Steps 4 and 5 for each
additional page.)
■
If the memory is full and you are faxing a single page, it will
be sent in real time.
■
You cannot send multiple pages for color faxes.
Next Page?
1.Yes 2.No(Dial)
Set Next Page
Then Press Set

Brother MFC-420CN Specifications

General

Type	All-in-One Printer
Printing Technology	Inkjet
Print Speed (Black)	20 ppm
Print Speed (Color)	15 ppm
Print Resolution	6000 x 1200 dpi
Scan Resolution	1200 x 2400 dpi
Fax Speed	33.6 Kbps
Display	LCD
Paper Capacity	100 sheets
Monthly Duty Cycle (max)	3000 pages
Max Printing Resolution (mono/color)	6000 x 1200 dpi
Max Printing Speed (mono)	20 ppm
Max Printing Speed (color)	15 ppm
Standard Media Capacity	100 sheets
Output Trays Capacity	50 sheets
Functions	Print, Scan, Copy, Fax
Connectivity	Ethernet
Media Type	Plain paper, Envelopes, Transparencies
Fax Resolution	203 x 196 dpi