vii
Safety precautions
To use the MFC safely
Please refer to these instructions for later reference and before
attempting any maintenance.
WARNI NG
There are high voltage
electrodes inside the MFC.
Before you clean the MFC,
make sure you have
unplugged the telephone line
cord first and then the power
cord from the AC power outlet.
Do not handle the plug with wet
hands. Doing this might cause
an electrical shock.
To prevent injuries, be careful
not to put your hands on the
edge of the MFC under the
scanner cover.
To prevent injuries, be careful
not to touch the area shaded in
the illustration.
When you move the MFC,
place a hand at each side of the
unit so you are supporting the
base when you lift it. (See the
illustration on the right.) Do not
carry the MFC by holding the
scanner cover.
Most of the illustrations in this User’s Guide show the
MFC-210C.
To Next Page
Loading...
Need help?
General
