What causes white horizontal lines on Brother MFC-5460CN?
White horizontal lines appearing in text or graphics from your Brother All in One Printer can often be resolved by cleaning the print head. Also, try using the recommended types of paper.
Why Brother MFC-5460CN prints smudged stain?
If you notice a smudged stain at the top center of printed pages from your Brother All in One Printer, make sure the paper is not too thick or curled.
How to resolve Brother MFC-5460CN All in One Printer printing dirty?
To address dirty prints or ink smearing from your Brother All in One Printer, ensure you are using the correct type of paper. Avoid handling the paper until the ink is fully dry.
What to do if Brother MFC-5460CN All in One Printer prints dense lines?
If your Brother All in One Printer is producing pages with dense lines, check the Reverse Order setting in the Basic tab of the printer driver.
Why Brother MFC-5460CN pages double-feed and cause a paper jam?
If printed pages from your Brother All in One Printer double-feed and cause a paper jam, make sure you pull out the paper support until it clicks.
Why Brother MFC-5460CN All in One Printer has vertical black lines when receiving?
If you notice vertical black lines when receiving faxes on your Brother All in One Printer, the sender's scanner may be dirty. Ask the sender to make a copy to see if the problem is with their sending machine. You can also try receiving from another fax machine to isolate the issue.
Why Brother All in One Printer has stains on the reverse side?
If stains appear on the reverse side or at the bottom of pages printed by your Brother All in One Printer, make sure the printer platen is not dirty with ink. Also, ensure you are using the paper support flap.
Why Brother All in One Printer has vertical black lines when sending?
If you are experiencing vertical black lines when sending faxes from your Brother All in One Printer, and a copy shows the same problem, clean the scanner.
What to do if Brother MFC-5460CN All in One Printer cannot install software or print?
If you cannot install software or print with your Brother All in One Printer, run the Repair MFL-Pro Suite program on the CD-ROM. This program will repair and reinstall the software.
How to fix Brother Office Equipment when there is no printout?
If your Brother Office Equipment is not printing, here are some things to check: * Ensure the interface cable is securely connected to both the machine and your computer. * Verify the machine is plugged in and not in Power Save mode. * Check if any ink cartridges are empty and replace them if needed. * See if the LCD is displaying any error messages. * Confirm that the correct printer driver is installed and selected. * Make sure the machine is online by going to Start, then Printers and Faxes, right-clicking ‘Brother MFC-XXXX’ (where XXXX is your model name), and ensuring ‘Use Printer Offline’ is unchecked.
General| I/O ports | 1x USB 1x RJ-45 |
|---|---|
| Scan speed | 4 sec/page |
| Network ready | Yes |
| Scan file formats | BMP, PDF, PNG, TIFF |
| Dimensions (WxDxH) | 440 x 395 x 226 mm |
| Networking features | 10/100Base-TX |
| All-in-one functions | Fax, Scan |
| Standard media sizes | A4, LTR, LGL, EXE, A5, A6, 10x15cm |
| Media types supported | Plain paper, Inkjet, Glossy, Transparent |
| Color all-in-one functions | copy, fax, print, scan |
| Print technology | Inkjet |
| Maximum resolution | 6000 x 1200 DPI |
| Print speed (black, normal quality, A4/US Letter) | 30 ppm |
| Print speed (color, normal quality, A4/US Letter) | 25 ppm |
| Maximum print size | 210 x 297 mm |
| Maximum ISO A-series paper size | A4 |
| Digital sender | No |
| Number of print cartridges | 4 |
| Scan to | E-mail, file, image, OCR |
| Scanner type | Flatbed scanner |
| Grayscale levels | 256 |
| Input color depth | 48 bit |
| Copier resize | 25 - 400 % |
| Maximum copy resolution | 1200 x 1200 DPI |
| Maximum number of copies | 99 copies |
| Copy speed (black, normal quality, A4) | 22 cpm |
| Copy speed (color, normal quality, A4) | 20 cpm |
| Faxing | Color faxing |
| Fax memory | 400 pages |
| Modem speed | 33.6 Kbit/s |
| Fax coding methods | JPEG, MH, MMR (Fax coding method), MR |
| Fax speed dialing (max numbers) | 100 |
| Total input capacity | 100 sheets |
| Total output capacity | 50 sheets |
| Auto document feeder (ADF) input capacity | 35 sheets |
| Display | LCD |
| Market positioning | Home & office |
| Compatible memory cards | CF, MMC, MS Pro, SD, xD |
| Standard interfaces | Ethernet, USB 2.0 |
| Bundled software | Brother MFL-Pro Suite Brother ControlCentre 3 ScanSoft Paperport SE + OCR Brother ControlCentre 2 NewSoft Presto! PageManager7 |
| Package weight | 13200 g |
Feature to prevent unauthorized access to machine operations.
Procedures for enabling or disabling the TX Lock feature.
Comprehensive guide to sending faxes via ADF or scanner glass.
Instructions on setting up and managing incoming faxes.
Important safety and legal information for operating the machine.
Guide to resolving issues and performing regular maintenance.
To Next Page
