Brother MFC-5490CN - Page 153

Menu and Features
143
C
2.Fax
(Continued)
1. Setup Receive
(In Fax mode only)
(Continued)
3.Fax Detect On*
Off
Receives fax messages
without pressing Start.
38
4.Remote Codes On* (l51, #51)
(l91, #91 for New
Zealand)
Off
Allows you to answer all
calls at an extension or
external telephone and use
codes to turn the machine
on or off. You can
personalize these codes.
51
5.Auto Reduction On*
Off
Cuts the size of incoming
faxes.
38
6.Polling RX Standard
Secure
Timer
Sets up your machine to
poll another fax machine.
67
2.Setup Send
(In Fax mode only)
1.Contrast Auto*
Light
Dark
Changes the lightness or
darkness of faxes you
send.
31
2.Fax Resolution Standard*
Fine
S.Fine
Photo
Sets the default resolution
for outgoing faxes.
31
3.Delayed Fax — Sets the time of day in
24-hour format that the
delayed faxes will be sent.
33
4.Batch TX On
Off*
Combines delayed faxes to
the same fax number at the
same time of day into one
transmission.
33
5.Real Time TX Next Fax Only
On
Off*
Sends a fax without using
the memory.
32
6.Polled TX Standard
Secure
Sets up the document on
your machine to be
retrieved by another fax
machine.
69
7.Overseas Mode On
Off*
If you are having problems
sending faxes overseas,
set this to on.
32
0.Glass ScanSize A4*
Letter
Adjusts the scan area of
the scanner glass to the
size of the document.
29
Main Menu Submenu Menu Selections Options Descriptions Page
The factory settings are shown in Bold with an asterisk.