Brother MFC-5490CN - 12 Making Copies; How to Copy; Entering Copy Mode; Making a Single Copy

72
12
How to copy 12
Entering Copy mode 12
Press (Copy) to enter Copy mode. The
default setting is Fax. You can change the
number of seconds or minutes that the
machine stays in Copy mode. (See Mode
Timer on page 21.)
The LCD shows the default copy setting:
1 Copy Ratio
2 Quality
3 No. of Copies
4 Paper Size
5 Paper Type
Making a single copy 12
a Make sure you are in Copy mode .
b Load your document.
(See Loading documents on page 17.)
c Press Mono Start for B&W copy or
Colour Start for colour copy.
Making multiple copies 12
You can make up to 99 copies in one print
run.
a Make sure you are in Copy mode .
b Load your document.
(See Loading documents on page 17.)
c Use the dial pad to enter the number of
copies (up to 99).
d Press Mono Start for B&W copy or
Colour Start for colour copy.
Note
To sort your copies, press the Options
key. (See Sorting copies using the ADF
on page 76.)
Stop copying 12
To stop copying, press Stop/Exit.
Making copies 12
Plain A4
100% Normal 01
1
2
5
4
3