Brother MFC-5490CN - 9 Remote Fax Options (Monochrome Only); Fax Forwarding

58
9
You can only use one remote fax option at
a time:
 Fax Forwarding
 Fax Storage
 PC Fax Receive
 Off
You can change your selection at any time. If
received faxes are still in the machine’s
memory when you change the Remote Fax
Options, a question will appear on the LCD.
(See Changing Remote Fax Options
on page 61.)
Fax Forwarding 9
When you choose Fax Forward, your
machine stores the received fax in the
memory. The machine will then dial the fax
number you have programmed and forward
the fax message.
a Press Menu, 2, 4, 1.
Remote Fax Opt
1.Forward/Store
b Press a or b to choose Fax Forward.
Press OK.
c Enter the forwarding number (up
to 20 digits).
Press OK.
d Press a or b to choose
Backup Print:On or
Backup Print:Off.
Press OK.
Note
• If you choose Backup Print:On, the
machine will also print the fax at your
machine so you will have a copy. This is
the safety feature in case there is a power
failure before the fax is forwarded or a
problem at the receiving machine.
• When you receive a colour fax, your
machine prints the colour fax at your
machine but does not send the fax to the
fax forwarding number you programmed.
e Press Stop/Exit.
Remote fax options
(Monochrome only)
9