Brother MFC-640CW Quick Setup Guide

Setting Up the Machine
11
10 Choosing a Receive Mode
There are three possible receive modes: Fax Only,
Fax/Tel and Manual.
1 Press Menu/Set.
2 Press 0.
3 Press 1.
4 Press a or b to choose the mode.
5 Press Menu/Set.
6 Press Stop/Exit.
For details, see Setup Receive in Chapter 4
of the User’s Guide.
11 Setting up the TAD
You must record an outgoing message in order to use
the TAD mode.
1 Record the TAD Outgoing Message (MSG
CTR OGM).
See Recording TAD Outgoing Message in
Chapter 7 of the User’s Guide.
2 Activate TAD mode.
Press and hold until it lights and the LCD
shows:
If the TAD Mode is on, it overrides your
Receive Mode setting. The built-in digital
TAD answers voice calls. If the call is a fax,
you can receive a fax automatically.
For details, see TAD in Chapter 7 of the
User’s Guide.
Now go to
For details, see TAD in Chapter 7 of the
User’s Guide.
Youcontrolthephoneline
andmustanswerevery
callyourself.
Doyouwantto
receiveafax
automatically?
Manual
Yourmachineautomatically
answerseverycallasafax.
Fax Only
Yourmachinecontrolsthe
lineandautomatically
answerseverycall.Ifthe
callisnotafax,itwillring
foryoutopickupthecall.
Fax/Tel
Yes
No
Doyouuseyour
machineforfaxes
only?
No
Yes
TAD:Msg Mgr

Brother MFC-640CW Specifications

General

Brand	Brother
Model	MFC-640CW
Category	Fax Machine
Language	English