To Next Page
R
Ryan RobertsAug 20, 2025
Why does my Brother All in One Printer say 'Ink Empty'?
- QqreevesAug 20, 2025
The 'Ink Empty' error on your Brother All in One Printer means one or more of the ink cartridges is empty. Replace the empty ink cartridges.
Why does my Brother All in One Printer say 'Ink Empty'?
The 'Ink Empty' error on your Brother All in One Printer means one or more of the ink cartridges is empty. Replace the empty ink cartridges.
What to do if my Brother All in One Printer says 'Near Empty'?
If your Brother All in One Printer displays the 'Near Empty' message, it means one or more of the ink cartridges are running out of ink. Order a new ink cartridge.
Why does my Brother All in One Printer say 'No Cartridge'?
The 'No Cartridge' error on your Brother All in One Printer means an ink cartridge is not properly installed. Take out the ink cartridge and put it in again seating it properly. See Replacing the ink cartridges on page 11-24.
What does 'Out of Memory' mean on my Brother All in One Printer and how to fix it?
The 'Out of Memory' error on your Brother All in One Printer means the MFC’s memory is full. Here's what you can do: * If sending a fax or copying, press Stop/Exit and wait for other operations to finish before trying again. * For MFC-410CN models, clear data in the memory or turn off Fax Storage. See Setting Fax Storage on page 6-2. * For MFC-410CN models, print faxes from memory. See Printing a fax from the memory (MFC-410CN only) on page 4-5. * If printing, reduce the print resolution.
Why does my Brother All in One Printer say 'Wrong Paper Size'?
The 'Wrong Paper Size' error on your Brother All in One Printer means the paper loaded is not the correct size. Reload the correct size of paper (Letter, Legal or A4), and then press Mono Start or Colour Start.
What does 'Data Remaining' mean on my Brother All in One Printer and how to clear it?
The 'Data Remaining' message on your Brother All in One Printer means print data remains in the MFC’s memory. This can happen because: * Print data remains in the MFC’s memory. Restart printing from your computer. * Print data remains in the MFC’s memory because the USB cable was unplugged while the computer was sending data to the MFC. Press Stop/Exit. The MFC will cancel the job and eject the page being printed.
How to fix a 'Comm.Error' on my Brother All in One Printer?
A 'Comm.Error' on your Brother All in One Printer indicates a communication error, often caused by poor phone line quality. Try the call again. If the problem continues, call the telephone company and ask them to check your phone line.
What causes a 'Connection Fail' error on my Brother All in One Printer?
A 'Connection Fail' error on your Brother All in One Printer occurs when you try to poll a fax machine that is not in Polled Waiting mode. Check the other fax machine’s polling setup.
What does 'Cover is Open' mean on my Brother All in One Printer and how to fix it?
The 'Cover is Open' error on your Brother All in One Printer means the scanner cover is not closed completely. Lift the scanner cover and then close it again.
What does 'No Response/Busy' mean on my Brother All in One Printer?
The 'No Response/Busy' message on your Brother All in One Printer means the number you dialled does not answer or is busy. Verify the number and try again.
General| Maximum print size | 210 x 297 mm |
|---|---|
| Maximum ISO A-series paper size | A4 |
| Maximum resolution | 1200 x 6000 DPI |
| Print speed (black, normal quality, A4/US Letter) | 20 ppm |
| Print speed (color, normal quality, A4/US Letter) | 15 ppm |
| Faxing | No |
| Modem speed | 14.4 Kbit/s |
| Copy speed (black, normal quality, A4) | 17 cpm |
| Copy speed (color, normal quality, A4) | 11 cpm |
| Scan speed | 4 sec/page |
| Dimensions (WxDxH) | 373 x 453 x 135 mm |
| Color all-in-one functions | copy, print, scan |
| Grayscale levels | 256 |
| Optical scanning resolution | 600 x 2400 DPI |
| Number of print cartridges | 4 |
| Operating temperature (T-T) | 5 - 35 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
| Total input capacity | 100 sheets |
| Total output capacity | 25 sheets |
| Market positioning | Home & office |
Instructions for safe operation and handling of the MFC.
Critical safety instructions for product usage, handling, and environment.
Instructions on how to use the MFC to make copies of documents.
Steps to activate fax mode and initiate dialling for sending faxes.
Essential procedures for sending faxes, including contrast adjustments.
Selecting the appropriate mode for receiving faxes and telephone calls.
Essential initial configuration steps, including date, time, and dialling mode.
Identification and resolution of common error messages displayed by the MFC.
