Brother MFC-210C User Manual

4 - 9 SETUP RECEIVE
Sequential Polling
The MFC can request documents from several fax units in a single
operation. You just specify several destinations in Step 5.
Afterwards, a Sequential Polling Report will be printed.
1
If it is not illuminated in green, press (
Fax
).
2
Press
Menu/Set
,
2
,
1
,
7
.
3
Press
▲
or
▼
to choose
Standard
,
Secure
or
Timer
.
Press
Menu/Set
when the screen displays the setting you
want.
4
If you selected
Standard
, go to Step 5.
■
If you selected
Secure
, enter a four-digit number and press
Menu/Set
, and then go to Step 5.
■
If you selected
Timer
, enter the time (in 24-hour format) you
want to begin polling and press
Menu/Set
, and then go to
Step 5.
5
Specify the destination fax machines, which you wish to poll by
using Speed-Dial, Search, a Group (see
Setting up Groups for
Broadcasting on page 5-3) or the dial pad. You must press
Menu/Set
between each location.
6
Press
Mono Start
or
Colour Start
.
The MFC polls each number or group in turn for a document.
Press
Stop/Exit
while the MFC is dialling to cancel the polling
process.
To cancel all sequential polling receive jobs, press
Menu/Set
,
2
,
6
. (See
Cancelling a scheduled job
on page 3-9.)

Brother MFC-210C Specifications

General

Maximum print size	210 x 297 mm
Maximum ISO A-series paper size	A4
Maximum resolution	1200 x 6000 DPI
Print speed (black, normal quality, A4/US Letter)	20 ppm
Print speed (color, normal quality, A4/US Letter)	15 ppm
Faxing	No
Modem speed	14.4 Kbit/s
Copy speed (black, normal quality, A4)	17 cpm
Copy speed (color, normal quality, A4)	11 cpm
Scan speed	4 sec/page
Dimensions (WxDxH)	373 x 453 x 135 mm
Color all-in-one functions	copy, print, scan
Grayscale levels	256
Optical scanning resolution	600 x 2400 DPI
Number of print cartridges	4
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Total input capacity	100 sheets
Total output capacity	25 sheets
Market positioning	Home & office