Brother MFC-210C User Manual

REMOTE RETRIEVAL ACCESS CARD (MFC-410CN ONLY) R - 1
Remote Retrieval Access card (MFC-410CN only)
If you plan to receive fax messages while away from your MFC,
carrying the Remote Retrieval Access Card printed below will serve
as a convenient reminder of the retrieval procedures. Simply cut out
the card and fold it to fit your wallet or organizer. Keeping it handy will
help you derive the full benefit of your MFC’s Fax Forwarding, and
Remote Retrieval features.
Using Remote Access Code
1
Dial your fax number from a telephone or fax machine using touch tone. When your machine answers, immediately enter your Remote Access Code (3 digits followed by ). Your machine signals the kinds of messages it received: 1 long beep — Fax messages No beeps — No messages. After 2 short beeps, enter a command. Press
9 0
to reset your machine when you finish.
Hang up.
2
3
4
5 6
1
4
Press
9 7 1
1 long beep — Fax messages 3 short beeps — No messages
C
HANGE
R
ECEIVE
M
ODE
Press
9 8
then for External TAD, press
1
.
Fax Only, press
3
.
Fax/Tel, press
2
.
E
XIT
R
EMOTE
O
PERATION
Press
9 0
.
CHECK RECEIVING STATUS
R
EMOTE
R
ETRIEVAL
A
CCESS
C
ARD
Fold Fold

Brother MFC-210C Specifications

General

Maximum print size	210 x 297 mm
Maximum ISO A-series paper size	A4
Maximum resolution	1200 x 6000 DPI
Print speed (black, normal quality, A4/US Letter)	20 ppm
Print speed (color, normal quality, A4/US Letter)	15 ppm
Faxing	No
Modem speed	14.4 Kbit/s
Copy speed (black, normal quality, A4)	17 cpm
Copy speed (color, normal quality, A4)	11 cpm
Scan speed	4 sec/page
Dimensions (WxDxH)	373 x 453 x 135 mm
Color all-in-one functions	copy, print, scan
Grayscale levels	256
Optical scanning resolution	600 x 2400 DPI
Number of print cartridges	4
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Total input capacity	100 sheets
Total output capacity	25 sheets
Market positioning	Home & office