Brother MFC-210C User Manual

11 - 24 TROUBLESHOOTING AND ROUTINE MAINTENANCE
Replacing the ink cartridges
Your MFC is equipped with an ink dot counter. The ink dot counter
automatically monitors the level of ink in each of the 4 cartridges.
When the MFC detects an ink cartridge is running out of ink, the MFC
will notify you with a message on the LCD.
The LCD will inform you which ink cartridge is low or needs replacing.
Be sure to follow the LCD prompts to replace the ink cartridges in the
correct order.
Even though the MFC informs you that an ink cartridge is empty,
there will be a small amount of ink remaining in the ink cartridge. It is
necessary to keep some ink in the ink cartridge to prevent air from
drying out and damaging the print head assembly.
1
Lift the scanner cover from the right-hand side of the MFC until
it locks securely into the open position.
If one or more ink cartridges are empty, for example Black, the
LCD shows
Ink Empty Black
and
Cover is Open
.
2
Pull the ink cartridge hook toward you and remove the ink
cartridge for the colour shown on the LCD.
3
Open the new ink cartridge bag for the colour shown on the
LCD, and then take out the ink cartridge.
Ink Cartridge Hook

Brother MFC-210C Specifications

General

Maximum print size	210 x 297 mm
Maximum ISO A-series paper size	A4
Maximum resolution	1200 x 6000 DPI
Print speed (black, normal quality, A4/US Letter)	20 ppm
Print speed (color, normal quality, A4/US Letter)	15 ppm
Faxing	No
Modem speed	14.4 Kbit/s
Copy speed (black, normal quality, A4)	17 cpm
Copy speed (color, normal quality, A4)	11 cpm
Scan speed	4 sec/page
Dimensions (WxDxH)	373 x 453 x 135 mm
Color all-in-one functions	copy, print, scan
Grayscale levels	256
Optical scanning resolution	600 x 2400 DPI
Number of print cartridges	4
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Total input capacity	100 sheets
Total output capacity	25 sheets
Market positioning	Home & office