Brother MFC-210C - Changing the Default Settings; Increasing Print Speed or Quality; Setting the Paper & Size

9 - 9 WALK-UP PHOTOCAPTURE CENTER
™
Changing the default settings
You can save the PhotoCapture Center
™
settings you use most often
by setting them as default. These settings will remain until you
change them again.
Increasing print speed or quality
1
Press
Menu/Set
,
4
,
1
.
2
Press
▲
or
▼
to select
Normal
or
Photo
.
Press
Menu/Set
.
3
Press
Stop/Exit
.
Setting the paper & size
1
Press
Menu/Set
,
4
,
2
.
2
Press
▲
or
▼
to select
Letter Glossy
,
10x15cm Glossy
,
13x18cm Glossy
,
A4 Glossy
,
Letter Plain
,
A4 Plain
,
Letter Inkjet
,
A4 Inkjet
or
10x15cm Inkjet
.
Press
Menu/Set
.
If you selected Letter or A4, press
▲
or
▼
to select the print size
(
10 x 8cm
,
13 x 9cm
,
15 x 10cm
,
18 x 13cm
,
20 x 15cm
or
Max. Size
).
Press
Menu/Set
.
3
Press
Stop/Exit
.
The Max. Size is available for MFC-410CN only.