Brother MFC-210C - Setup Receive; Choosing the Receive Mode

ix
4
Setup Receive ...................................................................... 4-1
Basic receiving operations................................................ 4-1
Choosing the Receive Mode ...................................... 4-1
To select or change your Receive Mode................4-2
Setting the Ring Delay ...............................................4-2
Setting the F/T Ring Time (Fax/Tel mode only).......... 4-3
Fax Detect ..................................................................4-4
Printing a reduced incoming fax
(Auto Reduction) .................................................... 4-5
Printing a fax from the memory (MFC-410CN only) ... 4-5
Reception into memory
(Not available for colour fax reception)................... 4-6
Polling (MFC-410CN only).......................................... 4-7
Secure Polling ........................................................ 4-7
Setup for Polling Receive (Standard) .....................4-7
Setup for Polling Receive with Secure Code..........4-8
Setup Delayed Polling Receive .............................. 4-8
Sequential Polling................................................... 4-9
5
Quick-Dial numbers and dialling options .......................... 5-1
Storing numbers for easy dialling .....................................5-1
Storing Speed-Dial numbers ...................................... 5-1
Changing Speed-Dial numbers .................................. 5-2
Setting up Groups for Broadcasting ........................... 5-3
Dialling options .................................................................5-5
Access codes and credit card numbers...................... 5-5
Pause .........................................................................5-5
Tone or Pulse (Not available in New Zealand)........... 5-6
6
Remote Fax Options (MFC-410CN only)
(Not available for colour faxes) ........................................... 6-1
Setting up Fax Forwarding .........................................6-1
Setting Fax Storage....................................................6-2
Setting PC Fax Receive .............................................6-2
Turning off Remote Fax Options ................................ 6-3
Setting your Remote Access Code............................. 6-3
Remote Retrieval..............................................................6-4
Using your Remote Access Code............................... 6-4
Remote commands ....................................................6-5
Retrieving fax messages ............................................6-6
Changing your Fax Forwarding number ..................... 6-6