What does 'Size mismatch' mean on my Brother All in One Printer and how to solve it?
If your Brother All in One Printer displays 'Size mismatch', it means the paper in the tray is not a correct size. Load an appropriate size of paper in the tray, and re-set the “Paper Size”.
What to do if my Brother MFC-7360 All in One Printer says 'Replace Toner'?
If your Brother All in One Printer shows 'Replace Toner', the machine will stop printing until you replace the toner cartridge. If you have set the Toner setting to Stop, replace the toner cartridge with a new and unused original Brother toner cartridge to reset the Replace Toner mode. If you have set the Toner setting to Continue, the machine will continue to print data until the LCD shows Toner Ended.
What does 'Drum Stop' mean on my Brother MFC-7360 All in One Printer and how to solve it?
If your Brother All in One Printer displays 'Drum Stop', it means it is time to replace the drum unit. Replace the drum unit.
What to do if my Brother MFC-7360 All in One Printer displays 'Cooling Down Wait for a while'?
If your Brother All in One Printer displays 'Cooling Down Wait for a while', it means the temperature of the drum unit or toner cartridge is too high, and the machine has paused its current print job to cool down. Make sure that you can hear the fan in the machine spinning and that the exhaust outlet is not blocked by something. If the fan is spinning, remove any obstacles that surround the exhaust outlet, and then leave the machine turned on but do not use it for several minutes. If the fan is not spinning disconnect the machine from the power for several minutes, then reconnect it.
What does 'Toner Ended' mean on my Brother MFC-7360 All in One Printer and how to solve it?
If your Brother All in One Printer displays 'Toner Ended', it means it is time to replace the toner cartridge with a new one.
How to fix 'No Toner' error on Brother MFC-7360?
If your Brother All in One Printer displays a 'No Toner' error, it means the toner cartridge is not installed correctly. To fix this, pull out the drum unit, take out the toner cartridge, and then put it back into the drum unit.
Why does my Brother All in One Printer say 'Cover is Open'?
The 'Cover is Open' message on your Brother All in One Printer indicates that a cover is not completely closed. It could be the front cover, the ADF cover, or the fuser cover. Make sure all covers are securely closed.
What does 'Toner Low' mean on my Brother All in One Printer and how to solve it?
If your Brother All in One Printer displays 'Toner Low', it means the toner is running low. It is recommended to buy a new toner cartridge before you get a Replace Toner message.
How to resolve 'Cartridge Error' on Brother MFC-7360?
If your Brother All in One Printer displays a 'Cartridge Error', it means the toner cartridge is not installed correctly. To resolve this, pull out the drum unit and remove the toner cartridge, then re-install the toner cartridge in the drum unit.
How to fix 'No Paper' error on Brother MFC-7360?
If your Brother All in One Printer displays a 'No Paper' error, it means the printer is out of paper or the paper is not loaded correctly in the paper tray. You can either refill the paper in the paper tray and press Start, or remove the paper and load it again, then press Start. If the problem persists, the paper pick-up roller may need cleaning.
General| Print Technology | Laser |
|---|---|
| Functions | Print, Copy, Scan, Fax |
| Fax Modem Speed | 33.6 Kbps |
| Duplex Printing | Manual |
| Memory | 32 MB |
| Print Speed (Black) | 24 ppm |
| Print Resolution | 2400 x 600 dpi |
| Copy Speed (Black) | 24 cpm |
| Copy Resolution | 600 x 600 dpi |
| Scan Type | Flatbed, ADF |
| Scan Resolution (Interpolated) | 19200 x 19200 dpi |
| Paper Capacity | 250 sheets |
| ADF Capacity | 35 sheets |
| Connectivity | USB 2.0 |
| Display | LCD |
| Dimensions (W x D x H) | 16.1 x 16.3 x 12.4 inches |
Information on how to load various paper types and media.
Step-by-step guide to loading paper into the main tray.
Instructions for loading documents into the ADF for scanning or copying.
Step-by-step instructions for sending a fax.
Explains different modes for automatically or manually receiving faxes.
List of common error messages and their solutions.
To Next Page
