Brother MFC-7440N

Setting Up the Machine
7
4 Selecting your language
1 Press Menu.
2 Press 0.
3 Press 0.
4 Select your language by using or and
then press OK.
5 Press Stop/Exit.
5 Setting the LCD contrast
You can change the contrast to help the LCD look
lighter or darker.
1 Press Menu.
2 Press 1.
3 Press 7.
4 Press to increase the contrast.
—OR—
Press to decrease the contrast.
Press OK.
5 Press Stop/Exit.
6 Setting the date and time
The machine displays the date and time, and if you
setup the station ID, it will add it to each fax you send.
1 Press Menu.
2 Press 0.
3 Press 2.
4 Enter the last two digits of the year on the dial
pad, and then press OK.
Date&Time
Year:2008
(e.g. Enter 0, 8 for 2008.)
5 Enter the two digits for the month on the dial
pad, and then press OK.
Date&Time
Month:03
(e.g. Enter 0, 3 for March.)
6 Enter the two digits for the day on the dial pad,
and then press OK.
Date&Time
Day:25
(e.g. Enter 2, 5.)
7 Enter the time in 24-hour format on the dial
pad, and then press OK.
Date&Time
Time:15:25
(e.g. Enter 1, 5, 2, 5 for 3:25 P.M.)
8 Press Stop/Exit.
Note
If you make a mistake and want to start again,
press Stop/Exit and go back to step 1.