7
6
Check the print quality
a When the preparation process has finished, the
LCD shows this message
.
Press Color Start.
b Check the quality of the four color blocks a on
the sheet. (black/yellow/cyan/magenta)
c If all lines are clear and visible, press Yes to
finish the quality check and go to step 7.
If you can see missing short lines, press No and
go to d.
d The LCD asks you if the print quality is OK for
black and color. Press Yes or No.
After pressing Yes or No for both black and
color, the LCD shows:
e Press Color Start, the machine will then start
cleaning the colors.
f After cleaning is finished, press Color Start.
The machine starts printing the Print Quality
Check Sheet again. Go back to b.
7
Choose your language
(if needed)
a Press MENU.
b Press a or b to display Initial Setup.
c Press Initial Setup.
d Press a or b to display Local Language.
e Press Local Language.
f Press your language.
g Press Stop/Exit.
OK
Poor
Set Paper and Press Start
1
Black OK?
Yes No
Start Cleaning?
Press Start
To Next Page
Loading...
Need help?
General
