9
9
Setting up the Message
Center
You must record an outgoing message in order to use
the Message Center mode.
a Record the Message Center outgoing
message (Msg Ctr OGM).
b Activate Message Center mode.
Press . The button will light when the mode
is active.
10
Set the date and time
The machine displays the time, and if you set up the
station ID the date and time will be added to each fax
you send.
a Press MENU.
b Press a or b to display Initial Setup.
c Press Initial Setup.
d Press a or b to display Date&Time.
e Press Date&Time.
f Enter the last two digits of the year on the
Touchscreen, and then press OK.
(e.g. Enter 0 9 for 2009.)
g Enter the two digits for the month on the
Touchscreen, and then press OK.
(e.g. Enter 0 3 for March.)
h Enter the two digits for the day on the
Touchscreen, and then press OK.
(e.g. Enter 0 1 for the first day of the month.)
i Enter the time in 24-hour format on the
Touchscreen, and then press OK.
(e.g. Enter 1 5, 2 5 for 3:25 P.M.)
j Press Stop/Exit.
See Outgoing message (OGM) in Chapter 9
of the User’s Guide.
If the Message Center Mode is on, it
overrides your Receive Mode setting. The
built-in digital Message Center answers
voice calls. If the call is a fax, you can
receive a fax automatically. For details, see
Message Center in Chapter 9 of the User’s
Guide.
Year:2009
Date&Time
OK
321
654
98
0
7
To confirm the current date and time, print
out the User Settings report. (See Printing
Reports in Chapter 10 of the User's Guide.)
Month:03
Date&Time
OK
321
654
98
0
7
Day:01
Date&Time
OK
321
654
98
0
7
Time:15:25
Date&Time
OK
321
654
98
0
7
To Next Page
Loading...
Need help?
General
